Follow structured, step-by-step measurement procedures with real-time guidance. Each workflow combines multiple measurement tools into a single guided flow — from setup through results.
Pre-event sound system verification. Check noise floor, frequency response, detect problems, and verify SPL at the listening position.
Full PA system alignment workflow. Capture baseline, run AI analysis, apply EQ corrections, and verify with before/after comparison.
Quick SPL measurement against OSHA, WHO, or EU noise standards. Select your standard, position the mic, measure, and get a compliance verdict.
Comprehensive room acoustics evaluation. Measure RT60, analyze room modes, check speech intelligibility, and get treatment recommendations.
Systematic feedback detection and elimination. Identify problem frequencies, apply notch filters, and verify system stability at operating level.
Professional audio measurement requires following established procedures to produce reliable, repeatable results. Without a structured approach, it is easy to miss critical steps, take measurements out of order, or forget to verify results against standards. SonaVyx guided workflows solve this by combining multiple measurement tools into sequential, step-by-step procedures that match real-world scenarios.
Each workflow is designed around a specific goal — whether that is a quick pre-show system check or a comprehensive PA tuning session. The system guides you through microphone positioning, measurement capture, analysis, and a final pass/fail summary so nothing gets overlooked.
System Check walks through essential pre-event verification: noise floor measurement, frequency response analysis, automated problem detection, and SPL verification at the listening position. Suitable for beginners and experienced engineers alike.
Tune PA provides a full system alignment procedure using transfer function measurement, AI-powered analysis, EQ correction guidance, and before/after verification. This workflow leverages the SonaVyx AI diagnostic engine to generate specific EQ recommendations.
SPL Compliance is a rapid compliance check against OSHA, WHO, EU Directive 2003/10/EC, or custom thresholds. It produces a clear COMPLIANT or NON-COMPLIANT verdict with margin data.
Room Analysis evaluates room acoustics through RT60 measurement, room mode analysis, speech intelligibility testing, and treatment recommendations. Ideal for venue surveys and commissioning reports.
Feedback Elimination provides a systematic approach to identifying and eliminating acoustic feedback. Using real-time spectral analysis to locate problem frequencies, it guides you through notch filter placement and gain-before-feedback verification.